How to Compare Zcash Mining Pools: A Beginner's Framework
2026-11-19 03:20

What should a beginner compare before joining a Zcash mining pool?

Choosing a Zcash (ZEC) mining pool is not about finding a single "best" pool. Established pools differ in payout method, published fee, withdrawal threshold and fee, connection endpoints, and account setup requirements. A beginner who compares these documented terms across a short list of pools is better positioned than one who selects a pool based only on its current hashrate ranking, which can shift quickly and does not by itself determine a miner's realized results.

The Zcash mining guide maintained by the Zcash community lists essentially the same factors: pool size, payout method, fee, geographic location and latency, user interface and statistics, and support. It also recommends pool mining over solo mining for more consistent rewards, since solo mining requires finding a full block independently.

Confirm your hardware supports Zcash's Equihash parameters

Zcash uses the Equihash proof-of-work algorithm with specific parameters (200,9), and mining speed is measured in solutions per second (Sol/s), not in TH/s or other Bitcoin-style units. A device listed generically as "Equihash-compatible" is not automatically compatible with Zcash; the specific parameter set, firmware, and current protocol version must match. ASIC hardware now accounts for the majority of Zcash network hashrate, and CPU or GPU mining is generally not economically practical by comparison. Before opening a pool account, confirm the exact algorithm parameters your device supports and check the pool's documentation for its endpoint and stratum configuration.

Compare payout methods before comparing headline fees

A published fee percentage is only meaningful once you know which payout model it applies to, because PPS+, PPLNS, and FPPS allocate reward variance differently.

PPS+ typically combines two components: a PPS-style payment for the block-reward portion, calculated from a miner's valid submitted shares regardless of whether the pool finds a block, and a separate distribution of transaction-fee revenue, often using PPLNS-style logic. This structure can reduce a miner's exposure to pool luck on the block-reward portion, while the transaction-fee component can still vary with how many blocks the pool actually finds.

PPLNS (Pay Per Last N Shares) distributes rewards based on a miner's shares within a defined recent window at the moment the pool finds a block. Because the pool must find blocks for any payout to occur, PPLNS rewards can fluctuate more over short periods than PPS+ rewards, even though published fees under PPLNS are often lower.

FPPS (Full Pay Per Share) is a PPS-style model in which the payout rate also factors in an allowance for expected transaction-fee revenue, independent of whether the pool finds a specific block.

None of these models should be described as a guaranteed-profit mechanism. They determine how reward variance is allocated between the pool and the miner; electricity cost, hardware efficiency, network difficulty, uptime, and ZEC market price remain separate variables that affect actual profitability.

Four Zcash mining pools worth comparing

The pools below are commonly referenced by new Zcash miners because each documents its terms clearly, while illustrating a genuinely different combination of payout method, fee structure, and account requirements. Pool fees, thresholds, and endpoints are product terms that pools can update, so confirm current figures on each pool's own page before connecting hardware.

Pool Payout method Published fee / discount Withdrawal threshold Notable setup detail
ViaBTC PPS+ or PPLNS (selectable) PPS+: 4% on the block-reward component, 2% on the transaction-fee component; PPLNS: 2% on combined rewards 0.001 ZEC (auto withdrawal) Global, European, SSL, and failover endpoints
F2Pool PPS+ 3% 0.1 ZEC Public ZEC pool page with documented stratum endpoint
Luxor FPPS 3.00% discount to FPPS 0.1 ZEC, plus a 0.005 ZEC withdrawal fee Global endpoint that routes to an available region
2Miners PPLNS 1.0% 0.1 ZEC, automatic payouts every two hours No account registration required

ViaBTC

ViaBTC documents both PPS+ and PPLNS for ZEC, letting a reader compare the two models within a single pool rather than across providers. Under its published fee schedule, the PPS+ block-reward component carries a 4% fee and the separately distributed transaction-fee component carries a 2% fee; these are not additive, since they apply to different reward components. Under standalone PPLNS, the combined reward is subject to a 2% fee. ViaBTC's ZEC mining documentation states that users can select a payment method, while its Mining Pools Information page lists global, European, and SSL endpoints, along with failover ports. ViaBTC's ZEC auto-withdrawal threshold is documented at 0.001 ZEC, which is lower than the thresholds published by the other three pools in this comparison; the pool fee and the withdrawal fee remain distinct costs and should not be combined into a single figure.

F2Pool

F2Pool offers a comparatively simple PPS+ reference point: a published 3% fee and a 0.1 ZEC payout threshold. This provides a useful contrast to ViaBTC's selectable PPS+/PPLNS structure and to 2Miners' PPLNS-only model.

Luxor

Luxor documents its ZEC compensation as FPPS, described specifically as a 3.00% discount to FPPS, together with a 0.1 ZEC payout threshold and a separately stated 0.005 ZEC withdrawal fee. Luxor's own documentation on revenue and payments is a useful illustration of why pool compensation terms and on-chain withdrawal costs should be read as two distinct disclosures rather than assumed to be the same charge.

2Miners

2Miners operates a PPLNS pool for ZEC with a published 1.0% fee, a 0.1 ZEC minimum payout, and automatic payouts processed every two hours. It does not require account registration, which can simplify setup for a beginner testing a single device. Its FAQ states that its PPLNS window covers the last 50,000 shares; this figure is specific to 2Miners' implementation and should not be assumed to apply to PPLNS at other pools.

A further example worth noting for contrast is Foundry's Zcash Pool, which documents a daily payout window but requires a balance above 1 ZEC on regular days, together with a whitelisted payout address and auto-withdrawal enabled. Foundry also publishes a lower payout threshold for the last day of each month in its payout threshold documentation. Its regular-day threshold is materially higher than those of the four pools above, but the month-end exception also matters when estimating how long a small balance may remain unpaid. This illustrates why a payout schedule alone does not tell a reader how quickly a small balance will actually be withdrawn.

Payout thresholds and withdrawal fees are separate from pool fees

A pool fee is charged against mined rewards; a withdrawal fee (where one applies) is charged when funds move on-chain, and a payout threshold determines the minimum balance required before a withdrawal is triggered. These three figures answer different questions and should be compared separately rather than combined into one number. A pool with a low published fee but a high withdrawal threshold may still leave a small miner waiting longer for an on-chain payment than a pool with a slightly higher fee but a lower threshold. Luxor describes its pool fee as a "discount to FPPS": a percentage deducted from the FPPS benchmark payout. When comparing percentages across pools, check the underlying reward calculation and the components to which each fee applies, rather than relying on the label alone.

Test connection quality and monitor share data

After selecting a shortlist, connect a device to each pool's nearest documented endpoint and monitor the resulting share data before committing significant hardware. A device's self-reported hashrate and a pool's share-based hashrate estimate are two different measurements; minor, persistent gaps between them are normal, while large or sudden divergence may indicate a connection, firmware, or configuration issue worth investigating. Rejected shares, disconnection frequency, and latency to the chosen endpoint are more informative over a multi-day test than a single snapshot.

A simple Zcash pool comparison checklist

Before moving hardware to a new pool, a beginner can walk through:

  1. Confirm the device supports Zcash's Equihash 200,9 parameters and current firmware.
  2. Identify whether the pool offers PPS+, PPLNS, or FPPS, and read how each defines its fee or discount.
  3. Record the published pool fee or discount alongside the withdrawal threshold and any withdrawal fee.
  4. Check the payout schedule and whether automatic withdrawal requires a whitelisted address.
  5. Test the nearest connection endpoint and review share and rejection data over several days.
  6. Confirm whether an account or subaccount is required, or whether the pool supports wallet-address-only access.

No single field in this checklist should be treated as decisive on its own; a sensible comparison weighs fee structure, withdrawal mechanics, and operational fit together.

FAQ

Is PPS+ more profitable than PPLNS for Zcash mining?

Neither model is inherently more profitable. PPS+ can reduce short-term variance on the block-reward component because payment does not depend on the pool finding a specific block, while PPLNS rewards depend on the pool's actual block-finding results within its share window. Realized profitability also depends on electricity cost, hardware efficiency, uptime, and ZEC price, which are unaffected by the payout model itself.

Do beginners need an ASIC to mine Zcash?

Current guidance from the Zcash community indicates that ASICs account for the majority of Zcash network hashrate and that CPU or GPU mining is generally not economically practical by comparison. Before purchasing hardware, confirm that the specific device supports Zcash's Equihash 200,9 parameters rather than a generic Equihash label.

How do withdrawal thresholds differ from pool fees?

A pool fee is deducted from mined rewards as part of the payout calculation. A withdrawal threshold is the minimum balance required before an on-chain payout is triggered, and a withdrawal fee, where applicable, is a separate charge for moving funds on-chain. These three figures should be reviewed individually rather than combined.

Can I choose between payout methods without opening a new account?

Some pools, including ViaBTC, document that a payment method can be selected as part of the account's mining settings rather than requiring a separate signup. Exact steps and any restrictions vary by pool, so check the specific pool's current account documentation before assuming a setting can be changed freely.

What should I check before connecting my first ASIC to a Zcash pool?

Confirm algorithm and firmware compatibility, record the pool's published fee, withdrawal threshold, and withdrawal fee, identify the nearest documented connection endpoint, and monitor share and rejection data for several days before scaling up hardware at that pool.

References